dangalore1988 0 Posted September 20, 2014 Hello, I have a AST400 or CCT716 CCTV system - the manual is at: http://starsec.com.au/Website%20Downloads%20section/AST%20400/AST400U_ENG_Ver1.pdf I cannot access the system as I do not know the admin password. The default is blank - the user can only be Admin, it does not let you change it. I have tried connecting through network using telnet/ssh etc but fails - I know it's on the network as Ping comes back fine. I have also tried removing CMOS battery which just resets the date back to 01/01/1996 00:00:00 and stills won't accept passwords. I have tried the obvious passwords like 11111111, 123456, 000000 etc - the field is 8 numeric only characters I have also taken the board out to search for help there - the board reads AST400 v1.1 but can't find anything online relating to it. I can only find 2 jumpers on the board J3 and J4 which I have tried shorting and nothing happens - I'm guessing they relate to IDE control though as they are directly next to the IDE connectors. I have looked for J1 and J2 - J2 does not exist but is printed on the board beneath another connector! I can't find J1 anywhere. Any help would be greatly appreciated - I have spent hours trying to get into this system and I'm wondering if it would be quicker guessing codes! Share this post Link to post Share on other sites
Numb-nuts 1 Posted September 20, 2014 How did youget to the situation where you don't know the password and now need access? admin is usually all lower case Share this post Link to post Share on other sites
dangalore1988 0 Posted September 20, 2014 Hi - I've forgotten what the admin password is Share this post Link to post Share on other sites
