hundleton1 0 Posted September 21, 2014 Hi everyone, i have a little geovision question, we stopped using GV years back but still look after a few, we recently had to rebuild a machine after a drive failure and set fully back up, iv installed with the latest version on a GV800 12 cam. I'm having some motion detection problems in that something is triggering it even with a static image, now i can't 100% remember but I'm sure geovision had a thing that would highlight what was triggering the detection, i sure it was little yellow squares that would show what it could see was moving, any ideas or am i thinking of another DVR? Share this post Link to post Share on other sites
Support_GeovisionUSA 0 Posted September 25, 2014 Hello hundleton1, Please refer to the tutorial video below for how to configure motion detect. ftp://geo-demo-japan.dipmap.com/UI_demo/GV-System/MotionDetectionAssociated/D5%20-%20Motion%20Detection%20Associated%20Group.htm If after follow the instruction, the motion detect seems not working, please feel free to contact our tech support. Tech support (949) 583-1519#2 or Live chat http://www.usavisionsys.com/ or Email: support@usavisionsys.com Share this post Link to post Share on other sites
bigspud 0 Posted October 14, 2014 it would be nice if the geo software had an option to leave a indicator of where on the video or jpg the motion was detected. the only thing that i found comes close is the object index detection which can show the colored rectangles. Share this post Link to post Share on other sites
Support_GeovisionUSA 0 Posted October 23, 2014 Hello bigspud, We will forward your suggestions to our HQ. Thank you for choosing Geovision! Share this post Link to post Share on other sites
