Newbie looking for outdoor remote viewing setup

[fisc0319 0]

Hello,

 

I have been reading quite a bit but have no real experience with anything cctv related besides setting up wifi in my house.

 

What I am trying to do is set up a camera on our farm in an area with no power. I anticipate using a battery and a solar panel to keep it going. I would like to be able to connect to it via laptop for maybe up to 1 hour at a time, maybe a max of 2 hours at the most. Its about a 2000ft line of sight. How would you go about doing this?

 

Let me add a wrinkle, it would be neat to be able to view a few cameras, some would not be direct line of sight, but could be in view of something that is in view of me. I'm not sure if that would require a bridge or repeater in between (not sure on correct terms). How could this be set up?

 

Thanks

Mike

[Bhawan 0]

Use a IP Camera to a wireless access point to a router.

 

hook the the ip camera via hard wire to access point and transmit wireless in line of sight.

 

http://www.tplink.ca/en/products/details/?categoryid=&model=TL-WA7210N

 

you can PM for further details and set-up maps.

[Stanleyryan 0]

Use Wi-Fi IP camera, via Access Piont (AP) for transit Wi-Fi signals, camera and AP powered by solar is ok

[51cent 8]

A somewhat similar thread was posted recently.

viewtopic.php?f=1&t=42554

That may help

[peterscot423 0]

You can Use the IP Camera to a wireless access point to a router and screwed the ip camera via hard wire to access point.