Fancift 0 Posted September 28, 2014 HELP~~~I have 216 3S cameras using 7 Digiop NVR's. Out in the field I have 1gig switches. I have 3 6 story buildings. Two and Three run to headin in Building One. Connection from each building to main Comm room is single mode fiber. Question how many cameras do you recommend per switch? Reason is that I am getting TONS of Video Loss and Connection Failure. I have gone out to each camera with a laptop and verified IP address and Video picture SO I KNOW it's all good and working. It's getting it all up at the DigiOp Connect software. I really need advise...not much help at this point from provider. They keep telling me to add more equipment. I just added a 48port at the head in...Didn't fix it. Share this post Link to post Share on other sites
thewireguys 3 Posted September 28, 2014 What switches are you using? Share this post Link to post Share on other sites
Fancift 0 Posted September 28, 2014 10/100's with 4 port I gig. Cameras all run into the 10/100 with the 1 gig back bone Share this post Link to post Share on other sites
joseph.chen0312 0 Posted September 29, 2014 How far distance between IPC and Switch? Share this post Link to post Share on other sites
