Jump to content
nicowizz

Problem with Dahua IPC-HD2200c

Recommended Posts

Hi,

 

I just bought a camera Dahua IPC-HD2200c.

 

Hi,

 

When I connect the camera with Smartpss, web navigator with my phone, picture jerk , stop 1/5 sec every 5 secondes, with 1080p or 720p mode, 20fps or 25 fps

 

The problem is with direct connection camera, but the camera with NVR not problem.

 

With a Hikivsion camera I haven't this problem.

 

Software Version2.212.0000.4.R, build : 2014-03-07

WEB Version3.2.1.173927

 

 

Thank you for your help.

sorry for my english

 

Nicolas

Share this post


Link to post
Share on other sites

I had a Dahua HFW3300C do something like that, and figured out it was the i-frame causing it. Their software apparently struggled with decoding the i-frame, causing it to pause briefly each time it got one.

 

What's your i-frame setting? It would have to be large to only see this every 5 seconds; at 20 fps, you'd need an i-frame setting of 100 to get the pause every 5 seconds.

 

If your i-frame is set at the Dahua default (usually 2x the frame rate, for one every 2 seconds), then this wouldn't be the cause.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×