torisdale 0 Posted October 17, 2014 I need assistance and I hope someone can help as I'm losing the plot! I have a custom workstation designed by a company that no longer exists and it is running with a Avermedia Averdigi NV6480 Express card. The card had two outputs that I think then has two DVI to BNC cables with 8 x video (BNC) and 8 audio connection on each. The exact product is below.. http://www.apexcctv.com/p-255-avermedia-nv6480exp-security-dvr-card.aspx One of the cables are faulty and i'm trying to buy a replacement but can't find one anywhere online! if somone can point me to one I would be delighted. Preferably in the UK but can live with US. Thanks Share this post Link to post Share on other sites
tomcctv 190 Posted October 17, 2014 Hi. I have about 15 PM me and your welcome to one Also why do you think faulty ? Are some channels missing ...... If so first check in settings to see if any are set for IP or analog Share this post Link to post Share on other sites
torisdale 0 Posted October 20, 2014 Channel settings shouldn't have changed and I looked over them and don't know what I'm looking for? it's not an IP system - Analogue using BNC cabling. I assumed it must be the cable as I couldn't see anything else? Share this post Link to post Share on other sites
tomcctv 190 Posted October 21, 2014 Channel settings shouldn't have changed and I looked over them and don't know what I'm looking for? it's not an IP system - Analogue using BNC cabling.I assumed it must be the cable as I couldn't see anything else? Hi. Your system is a hybrid analog or IP. Under system settings click on camera and in middle of screen you will see analog IP or DVR ....... Click on each camera at top of screen and check analog is picked .... Also then BNC leads this will give you problems if not in the right connector on your card. You should have two leads and one will have a yellow phone out ...(this is only on 1 lead ) and should only be in the top connector on card. Share this post Link to post Share on other sites
torisdale 0 Posted October 21, 2014 Channel settings shouldn't have changed and I looked over them and don't know what I'm looking for? it's not an IP system - Analogue using BNC cabling.I assumed it must be the cable as I couldn't see anything else? Hi. Your system is a hybrid analog or IP. Under system settings click on camera and in middle of screen you will see analog IP or DVR ....... Click on each camera at top of screen and check analog is picked .... Also then BNC leads this will give you problems if not in the right connector on your card. You should have two leads and one will have a yellow phone out ...(this is only on 1 lead ) and should only be in the top connector on card. It is the lead with the yellow phono i'm having issues with.. currently connecting via BNC to the BNC input however I think at one point it was connected to the white phono using a phono to bnc adaptor? Share this post Link to post Share on other sites
torisdale 0 Posted December 16, 2014 Anyone able to help? Share this post Link to post Share on other sites
