Can see cam in SADP, but can't ping...

[theTastyCat 0]

Hey all - I apologize for what I'm sure is the very elementary nature of this post, but my little head has been about scratched out. I'm setting up my first IP cam, a Hikvision 3332 turret. I've got it connected to AC power and plugged directly into my PC/DVR (it's temporarily got internet tethered through my phone, but usually will not).

 

I'm trying to access the camera through my browser. I downloaded SADP, and the camera appears and allows me to change things.

 

When I run ipconfig, here's what I get:

 

IP: 192.168.19.2

Subnet mask: 255.255.255.0

Default gateway: 192.168.19.1

 

So, using SADP, I set the camera as follows:

 

IP: 192.168.19.3

Port: 8000

Subnet mask: 255.255.255.0

IPv4 gateway: 192.168.19.1

 

When I run cmd and put in "ping 192.168.19.3 -t", I pretty soon get "request timed out."

 

I disabled AVG and turned off Windows Firewall, but still no ping and no browser access.

 

Any pointers?

 

I'm sure this is pretty elementary...so thank you for your patience with me!

 

Many thanks, all!

[theTastyCat 0]

Please ignore me, I am an idiot. I somehow got my tethered internet's IP confused with the local IP. Ridiculous! Logged in just fine now. I'll be back when I break something else

 

Many thanks, all.

[IdahoMan 0]

When I run ipconfig, here's what I get:

 

IP: 192.168.19.2

Subnet mask: 255.255.255.0

Default gateway: 192.168.19.1

 

So, using SADP, I set the camera as follows:

 

IP: 192.168.19.3

Port: 8000

Subnet mask: 255.255.255.0

IPv4 gateway: 192.168.19.1

 

 

Ok,

 

I just got my Hik bullet 2032. I'm doing just what you are doing...

 

Plug my cam directly into the back of my computer and..

 

1. cmd

2. ipconfig

3. SADP the camera to correct IP address

4. ping camera's IP address

 

After a few moments it gives me four "request timed out" errors. Also the little network icon in lower-right taskbar has a yellow "little or no connectivity".

 

Tried pinging the cam's IP address again and now I get four replys, but still nothing in my browser when I try to "live view" it. And the lower-right icon is still yellow.

 

Advise?

[IdahoMan 0]

Ok:

 

My cable-modem is plugged into my router, my Computer and the IP Cam are plugged into my router.

 

I repeated the steps above. Pinged the cam:

 

C:\Documents and Settings\Gamer>ping 192.168.1.90

 

Pinging 192.168.1.90 with 32 bytes of data:

 

Reply from 192.168.1.90: bytes=32 time<1ms TTL=64

Reply from 192.168.1.90: bytes=32 time<1ms TTL=64

Reply from 192.168.1.90: bytes=32 time<1ms TTL=64

Reply from 192.168.1.90: bytes=32 time<1ms TTL=64

 

Ping statistics for 192.168.1.90:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms

 

C:\Documents and Settings\Gamer>

 

Went into FireFox and typed in the IP address. And "Live View" is still blank.

 

Here's a screenshot: