mos2111 0 Posted October 27, 2014 I already have 12 cameras on the system and it works well. I added a 13th camera and went into the password settings and checked the new camera, logged out and restarted the system (several times). The camera will not appear in the monitor screen when one large view box and 12 small view boxes are the selected display. The 13th feed view gives me the geovision logo. When you click camera 13 to make it the main camera, it works and becomes the main camera. It also works on the 16 camera monitor display feature. I went back through to the camera install and "installed" it and have the same settings as the other 12, and the feed is visible in the camera settings box as well... Any thoughts? Share this post Link to post Share on other sites
Support_GeovisionUSA 0 Posted November 7, 2014 Hi MOS2111, We need more infomation to solve the issue you have. (eg. multicam version, what model and firmware of new camera you have?...etc) I'd suggest you to contact our tech support directly. We would love to assis you. Tech support (949) 583-1519#2 or Live chat http://www.usavisionsys.com/ or Email: support@usavisionsys.com Share this post Link to post Share on other sites
