essexlee 0 Posted November 1, 2014 Hello, I installed a 4 channel zeus qvis nvr and 4 IP 3MP cameras. the last camera I plugged in started skipping, if someone walked past they jumped across the screen. I swapped it with another camera that was fine so see if it was the camera, now both cameras are doing the same thing. the seconds go a bit strange, they go fast n slow. I tried bringing the resolution down but that makes no difference. Any clues anyone? Thanks Share this post Link to post Share on other sites
dexterash 0 Posted November 3, 2014 How are the cameras connected to the NVR? Share this post Link to post Share on other sites
Don Stephens 0 Posted November 4, 2014 Do you have model numbers for the NVR and cameras (or links...)? Share this post Link to post Share on other sites
Neutech 0 Posted November 5, 2014 Motion detection? Did you configure the MD on the NVR or direct on the camera? Do it on the camera direct and set up the MD grid etc not on the NVR Share this post Link to post Share on other sites
