Recovery of a 2cd-2132 - Missing all files, bricked?

[JamesT 0]

I have tried updating my Hikvision 2cd-2032 but when i was copying over the edited davinci.tar and in the middle of it the ftp crashed.

 

When i went back into it the are no files in the camera at all and now showing a different version and model number altogether.

 

Serial now showing as DS-2CD-Min-System0120140827CCRR47784****

Model Number - V4.0.8 140610

 

Anyone got any ideas on how to fix this please?

[iTuneDVR 2]

TFTP recovery.

 

The serial number is changed, so what of it.

Because of this camera is it will be worse?

[JamesT 0]

Just follow the TFTP recovery on the Hikvision website and get the firmware from there?

 

Having a look here, can not get the TFTP folder to download

 

http://www.hikvision.com/UploadFile/File/201433116851896.pdf

 

Sorry your last sentence is not making much sence to me.

 

Thanks

[iTuneDVR 2]

Just follow the TFFP recovery on the Hikvision website and get the firmware from there?

Sorry your last sentence is not making much sence to me.

Thanks

 

Your topic Recovery of a 2cd-2132 - Missing all files, bricked?

I have tried updating my Hikvision 2cd-2032 but when i was copying over the edited davinci.tar and in the middle of it the ftp crashed.

Download original firmware for rapror2XX2 and recover it via TFTP.

Full instructions how to do it.

If you managed to break, I think I will manage to fix it.

[JamesT 0]

Sorry where are the full instructions on where to do it?

 

And do i need the Chinese/US/EU firmware?

 

I very much appreciate your help

[iTuneDVR 2]

Use any 5.2.0 raptor firmware.

Well, if you have decided on the patch, then you will understand, and in this simple situation.

 

1. PC IP = 192.0.0.128

2. Start TFTP Server, put ddigicap.dav to the TFTP directory

3. Plug IPC

 

After success, don't forget close TFTP Server

[JamesT 0]

Thank you, still getting my head around this.

 

Is this the same process just using a camera and not a NVR?

 

https://www.youtube.com/watch?v=VlgnqTKsTn0

 

Also my camera's are connected via POE would it be better to plug directly into my laptop using ethernet or am i going about this the wrong way.

[iTuneDVR 2]

Yes, the same

[buellwinkle 0]

Your serial number and cameras model are fine, those are not part of the firmware update so once you recover via TFTP you'll be fine. Also, the bootloader is not part of the firmware update, so that should work fine to and work with TFTP.

[iTuneDVR 2]

Your serial number and cameras model are fine, those are not part of the firmware update so once you recover via TFTP you'll be fine. Also, the bootloader is not part of the firmware update, so that should work fine to and work with TFTP.

Of course, the way it is.

[JamesT 0]

Thanks,

 

Have not got around to do this yet, but the Hikvision firmware is fine on any 2XX2 model camera?

 

Also would this be the way to do it

 

Change IP of PC

Start TFTP, firmware.

Plus the camera directly into my laptop via ethernet cable

[JamesT 0]

Tried the above and no joy, i assume as there is no power going to the IP camera. I use a NVR with 4 POE ports. Also i have a POE 8 port switch.

 

Would the switch work?

 

Ip camera - ethernet cable plugged into POE port on the switch - ethernet cable from another POE port, or standard port plugged into the laptop ethernet port.