shakamaker 0 Posted November 10, 2014 Hi Noob here! I have just brought a Xvim system off of ebay and have connected it all up....so far so good. I have a BT HH5 and connected to that is an 8 port switch which I have used to connect to the CCTV. I have opened ports on the router (TCP and UDP) as 8080. I have a static (unused IP address) and I have the app on my iphone but alas I can not get the thing to work remotely! Any hints? Regards Share this post Link to post Share on other sites
jazzar 0 Posted November 11, 2014 have you checked the network settings page to see if other ports are required for streaming video or data control- if needed add them to the router for port forwarding also. Share this post Link to post Share on other sites