Toetsje 0 Posted November 12, 2014 Hi! I've bought a Hikvision DS-7604NI-SE DVR (FW2.3.7) and a Hikvision DS-2CD2032-I camera. I'm able to record a continuous video stream or clips based on motion detection. However, I would like to record continuously AND have an indication when motion has been detected. Is this possible? Searching for events within a continuous stream is not workable (takes ages). I'm afraid that the system might not detect some motion events and therefore I don't want to rely on the motion based clips only. Share this post Link to post Share on other sites
Securame 0 Posted November 12, 2014 I'm able to record a continuous video stream or clips based on motion detection. However, I would like to record continuously AND have an indication when motion has been detected. Is this possible? Not possible Share this post Link to post Share on other sites
Toetsje 0 Posted November 12, 2014 Mmm, that's a pity. I was able to do this with the old fashioned Chinese recorder so I expected more or less the same functionality. Share this post Link to post Share on other sites
FIERCE4203 0 Posted December 7, 2014 You can record 24*7 and also make a motion event at same time. Its all under record settings and motion within nvr not cam. Easiest way is do it from ip address of nvr. Share this post Link to post Share on other sites
