dans95tbird 0 Posted December 10, 2014 I currently have the following system setup: American Dynamics MP48 AD1100cc Keyboard AD2088 Keyboard ADTTE Keyboard 26 Ultra 8 PTZ Using RS422 2 Samsung DVR's The issue is that the AD2088 keyboard seems to have a mind of its own, If I zoom in it will zoom back out automatically, also when panning it is very choppy and not smooth. I though maybe a faulty keyboard, so I borrowed another AD2088 and it is doing the same thing. I have verified the settings to what I thought they should be according to the manual. Please Help its driving me NUTS!!! Share this post Link to post Share on other sites
abdelm01 0 Posted December 15, 2014 Cant believe you're still on Analog first of all LOL. It could be the camera that is going bad or the matrix. Have you tried putting the cables into different ports etc. Also try factory restore and reload firmware on the device if possible. I would just upgrade to IP all over. The best way is that buddy. Share this post Link to post Share on other sites
tip_ex 0 Posted February 27, 2015 Please verify that the keyboard is in the REPEAT OFF mode on ADTTE and AD2089. On your CC keyboard it is called MAKE BREAK I think. please verify in your keyboard manual and it will allow you to operate your camera properly. Share this post Link to post Share on other sites
