PeteCress 0 Posted December 11, 2014 I've had one of these cams working for years.... so long that I have forgotten how to get to it's setup page. All I can remember is that it is non-standard. i.e. it's not just the HTTP port.... Tried the "Config Tool" that came with the cam, but the interface is rudimentary and not what I'd call a camera setup page. This particular cam's IP addr is 10.0.0.141. have it's RTSP port as 1411, and that responds - and BlueIris reads it a-ok. I have it's HTTP port set to 1410 - and that shows up when I do a network scan... but 10.0.0.141:1410 in a browser window throws "Page not found"..... Can somebody refresh my failing memory? Edit 2012 12-11 15:32: I think the cam's wacked. Downloaded the latest (v1.0.5) config tool , finally realized that I had to right-click on the cam and select "Open Device Web".... but it's still saying "This page can't be displayed". Looks like it's trying to go at it via port 80, so I tried 1410.... but still nothing.... and the net scanner I use says that cam is not (as expected) exposing port 80, but is exposing port 1410. Share this post Link to post Share on other sites
