bspieg 0 Posted December 17, 2014 Reloaded firmware I recently bricked my new IPcam while trying to patch the firmware to remove the NAS format issue. So, I had to refresh the firmware. I downloaded a new image from Hikvision's website. I obtained their pdf explaining the reload process which had a link to the TFTP tool imbedded in the pdf. It did not work. I looked around the web for a TFTP tool. I found several but none worked. Then, I discovered the Hikvision TFTP tool on this website. It worked first time. Be sure and use their tool. When the camera is first powered on, it looks briefly (2-3 seconds) for a handshake from the TFTP tool. Be sure to have it setup EXACTLY as stated in the pdf instructions. No cross over cable needed, just a regular ethernet will do. Once the firmware reports loaded, wait 2-3 minutes extra before power cycling. TFTP Firmware tool: ftp://Hikcustomer:welcome@125.99.126.50 Change the Default Language The camera web interface with new firmware is now Chinese. It was English before. I worked a few days to perfect this change which can easily be done on the camera to change the default language to any of those available. The change survives a reboot. First, you need to enable SSH on the camera. Go to the web interface and you'll have to hack your way to find it. Login, click the 4th item on the top which is Configuration. The, third category on the left is Advanced Configuration. 5th item down is Security. 5th tab is Security Service. 2nd item is SSH. Click the box to enable, save. Startup Script Wouldn't it be nice to be able to execute your own scripts at camera startup? There just isn't any mechanism for this ... until now. I'll show you have since we need this to change the web language. This can be used to start all kinds of personal processes. Enjoy! SSH to your camera and login. All this is in english. You are in the top directory. The directory /dav contains the firmware images, boot scripts and this directory survives a reboot. On boot, the script /dav/initrun.sh is run. We will leverage this. Create a directory in /dav to place your script. mkdir /dav/scripts Let's modify /dav/initrun.sh to execute our script at the conclusion of the boot process. You might want to look at this file before modifying it. BE VERY CAREFUL with this series of commands in case you make an error. There is no editor on the camera and care means you can avoid having to copy to/from a NAS for corrections. View the file: cat /dav/initrun.sh backup the file: cp /dav/initrun.sh /dav/initrun-back.sh Modify it by appending a line: echo "bash /dav/scripts/startup.sh &" >> /dav/initrun.sh If you mess up, simple copy from the backup and try again. cp /dav/initrun-back.sh /dav/initrun.sh OK, we now have the camera firing off your non-existent script called startup.sh on boot. We'll create the script shortly. Let's find the website files. The website files are recreated fresh on boot. Let's look at the language files: ls /home/doc/xml You see directories containing the various languages. The file Languages.xml tells the website what to use. Despite the default stated in this file to be English, it defaults to Chinese. So, we won't mess with that file. Instead, we will trick the system. We will change the directory containing Chinese to a different name and replace that directory with a symbolic link to English (or whatever language you want). When the website uses Chinese, it actually uses what we want. If you want a language other than English, make note of the directory name. You will use this in place of "en" as we move forward. Let's create the startup.sh script. We want to change our directory to the xml area. We move the Chinese language from directory zh to zh1. We create a symbolic link for zh that points to en. That's all the script does but it works. We will use echo to create the script. echo "cd /home/doc/xml mv zh zh1 ln -s en zh" > /dav/scripts/startup.sh Check it's contents: cat /dav/scripts/startup.sh The script will survive a reboot. The language will change and remain this way until you replace the firmware. You now have a great new feature - a startup script. You can add to this script to run other things, change the firewall, change which ports are used or run your own scripts. Be sure to watch the memory use. See the memory available with the "df" command. Good luck! Share this post Link to post Share on other sites
Securame 0 Posted December 17, 2014 Interesting. Thanks! Share this post Link to post Share on other sites
iTuneDVR 2 Posted December 17, 2014 Many ways to do it. because having access to the IPC, DVR, NVR via telnet, you could still have long to explore and see thin places. I realized this at the beginning of 2014, someone later. But the language that gives a little. Translations are available in the Chrome browser. It will not make a full-featured camera Share this post Link to post Share on other sites
catseyenu 0 Posted December 17, 2014 While there may be many ways to skin a cat this certainly qualifies as one of them. " title="Applause" /> Share this post Link to post Share on other sites
iTuneDVR 2 Posted December 17, 2014 In hikvision everything is very simple need only look a little Share this post Link to post Share on other sites
