badri249 0 Posted January 3, 2015 I can remotely access my router but can't access my dvr. I have successfully configure each and every things for remotely access. I check the port through open port check tool and it show the succcessful result i.e. my dvr port is open. when I ping the ddns host name it result success with reply. When I enter my ddns domain name with the port of dvr in address bar of my browser it can't open But I can access my router page with ddnsdomainname with port 80. Can somebody give me some idea why I can't access it? Share this post Link to post Share on other sites
fonix 0 Posted January 3, 2015 Did you configure your dvr to use http port other than the default 80? Try 8080 Share this post Link to post Share on other sites
kevindx 0 Posted January 3, 2015 Change the DVR HTTP port to 88 or 81. It will fix the problem. Because Router uses 80 port too. Share this post Link to post Share on other sites
ssnapier 0 Posted January 3, 2015 Hang on a second, what port did you assign to your DVR? Kevin is right port 80 will not work on both, but I am guessing that your router would have given you an error message had you tried to use the same port to point at two locations. Some DVR's have multiple ports and they are named in a weird way. I have seen some that have a media port, a web port and another that is called all kinds of things (remote, support, alternate, etc.) Share this post Link to post Share on other sites
badri249 0 Posted January 4, 2015 I have changed the dvr http port to 8001 and 8002 for mobile. Share this post Link to post Share on other sites
