gabemcg 0 Posted January 11, 2015 Just got a Hikvision DS-7608NI-E2/8P. Installed a WD Red 3TB drive in it. Formatted it via the web GUI no problem, and it shows a status of "Normal". From the "Live View" page, I click the record button, and I get an error "Message from webpage. No enough space". I am running 3.0.10. Any ideas? Share this post Link to post Share on other sites
Securame 0 Posted January 12, 2015 From the web interface on a computer? When you click on the "record" button on the web interface you are actually telling the web browser to make a local copy on your computer. So, you will record on your local HD, not the HD you have installed on the NVR. If you have not configured a directory on the local computer, and you are not running the web browser with administrator rights, it will give you an error since it is not able to record. Share this post Link to post Share on other sites
gabemcg 0 Posted January 13, 2015 Got it! I set one of my cameras to "continuos" record to test, and it works fine. Thanks for the clarification. To prevent me from asking stupid questions in the future, is there any good English documentation on the web GUI for the 3.0.10 version I am running? Share this post Link to post Share on other sites
MaxIcon 0 Posted January 14, 2015 Hik, and most of the mid-range manufacturers, are not real strong on documentation, especially about keeping it up to date as versions change. Luckily, community support is strong for the popular brands. Share this post Link to post Share on other sites
