jamangus 0 Posted January 11, 2015 this image problem comes and goes on one camera. cant correlate it to anything. re-terminated cable ends. what you think...cable/settings/camera/firmware? hik 2032 Share this post Link to post Share on other sites
abdelm01 0 Posted January 12, 2015 What Firmware do you have on it. Have you tried reloading the Firmware? Also check to make sure the cat 5 is not crossing an unshielded power cable somewhere in the roof from Point A to Point B. I have had many problems in Casinos where cameras would go in and out like that. But also could have an issue with the camera. Also put the camera back in default mode to make sure you have not messed up an settings and start from scratch. But Reload the FW first. Do you need the FW? Share this post Link to post Share on other sites
