GeeZa 0 Posted January 21, 2015 Hi all, I have switched ISP and they gave me a new modem/router ZTE ZXHN H367N I have opened the ports 37777 & 37778 & 80 on the new modem for my Dahua DVR5104 when I try to enter the web interface via quickddns.com it opens my modem/router can someone help me solve this problem? cheers Share this post Link to post Share on other sites
goodolick 0 Posted January 21, 2015 Sounds like both your router and nvr are listening for web traffic on port 80. Change the port of the NVR or Routers configuration page to an unused port. Share this post Link to post Share on other sites
GeeZa 0 Posted January 21, 2015 Thanks for the reply I have changed the DVR to HTTP port 1111 still does the same thing when i try to open it via quickddns.com it opens the router also my alarm does not open at all via http? Share this post Link to post Share on other sites
unix1992 0 Posted January 21, 2015 Thanks for the reply I have changed the DVR to HTTP port 1111 still does the same thing when i try to open it via quickddns.com it opens the router also my alarm does not open at all via http? You need to enter external_IP:1111 You have to change the HTTP port in your DVR and you have to forward the 1111 in your Modem. If it still not works try the following since some modems hate it that the device itself has a static IP. Log in to your dvr using the tv interface, go to networ settings. Check the DHCP box, so the DVR got an IP from your modem. Exit the settings. Then go again to your network settings on your dvr. Look up the internal IP address: 192.168.1.XXX. Change in the network setting the HTTP port to 1111. Log in to your modem interface and forward the HTTP port and the other ports (used for the video) using the new internal IP address. To access your DVR on your internal network: 192.168.1.XXX:1111 To access your DVR on your external network: External_IP:1111 Share this post Link to post Share on other sites
GeeZa 0 Posted January 24, 2015 Thanks for the reply I have changed the DVR to HTTP port 1111 still does the same thing when i try to open it via quickddns.com it opens the router also my alarm does not open at all via http? You need to enter external_IP:1111 You have to change the HTTP port in your DVR and you have to forward the 1111 in your Modem. If it still not works try the following since some modems hate it that the device itself has a static IP. Log in to your dvr using the tv interface, go to networ settings. Check the DHCP box, so the DVR got an IP from your modem. Exit the settings. Then go again to your network settings on your dvr. Look up the internal IP address: 192.168.1.XXX. Change in the network setting the HTTP port to 1111. Log in to your modem interface and forward the HTTP port and the other ports (used for the video) using the new internal IP address. To access your DVR on your internal network: 192.168.1.XXX:1111 To access your DVR on your external network: External_IP:1111 thanks mate, it seems the modem/router is faulty i added my old router lan to lan and now it works fine wierd ..... Share this post Link to post Share on other sites
goodolick 0 Posted January 25, 2015 more than likley a config issue on the new router, but, glad you got it fixed. I always make my ISP give me clean external IP and prefer to use my own router, rather than the POS built into the modem. Share this post Link to post Share on other sites