Question about Geo-650 DVR card

[PA2001 0]

Been reading around this forum for a while, and found answers to many of my questions.

Been running a 16 channel GV-650 card for about a year in an older computer, and it all worked ok, but it was kinda slow. Decided to upgrade to a faster PC:

 

Intel 2.8G proc.

Intel Motherboard D915GEV

1 gig DDR2 gam

 

Installed DVR card and version 5.4.0.1 Geo software, and the system works fine.

 

Then I installed Geo software version 6.1, and now an error message appears on the screen:

 

Micro-P version not compatable.

Please call your vendor to upgrade your HW.

 

Always must have a plan B!

 

Installed the GV-650 card into another system:

 

AMD 3700+

ASUS Motherboard AN8-VMUAYGZ

1 gig DDR ram

 

Same thing happens again. Works fine with SW version

5.4.0.1, but the same error message appears with version 6.1.

 

Can anyone help?

 

Thanks!

[scottj 0]

You have an older version 650 board (V2). In order to run 6.1 and higher you need a V3 board with either the S1 chipset or a dongle keypro.

 

Scottj

[PA2001 0]

Yes, it is an older card. Guess I'll have to live with the older version of the SW.

 

Thanks!

[CollinR 0]

Don't fret though, the 650 is a great value board. The nest value step is to the combo cards and they are quite a bit more money.

[PA2001 0]

Ya, it works as advertised, and meets my needs for now.

[cindysuemt 0]

I must have the older board too. How can I upgrade it?

[keithm 0]

I had the micro-p error after changing to an Acer AcerPower F1 PC due to the other system failing.

 

Thanks to this particular forum I changed from installing Geovision 6.1 to installing 6.0.5, which seems to work just fine.

 

Thanks for the support given to others. I know its been more than a year since this stuff was posted but a search found the answer here.

 

Thanks to Rory and the other founders for setting up the CCTV Forum in the first place.