Configuring for remote access

[erict@airweld.net 0]

Hello....I have a Digimerge VCD-316 in two seperate locations. I have configured nat translations in my cisco router and have an access list. I beleive I am fowarding the ports correctly but for some reason I cannot connect remotely. Here is my nat translations:

 

ip nat inside source static udp 192.168.5.110 11000 66.251.98.182 11000 extendable

ip nat inside source static tcp 192.168.5.110 8000 66.251.98.182 8000 extendable

ip nat inside source static udp 192.168.7.110 11000 66.251.104.162 11000 extendable

ip nat inside source static tcp 192.168.7.110 8000 66.251.104.162 8000 extendable.

 

I was told that these are the port fowards from Digimerge:

 

TCP Ports

7000 (login port)

8000 -> 8001 (live video port)

9000 -> 9001 (remote playback port)

2000 (remote config/web port)

 

UDP Ports

11000 (data synchronization port)

 

However, they really only give support for linksys routers. Can someone help?

[Billyk 0]

What model # router and what version of IOS??