Lock-Up 0 Posted February 26, 2015 We setup a 960H DVR system - 16Ch with two monitors in separate rooms. The main DVR monitor is connected using a VGA cable to the DVR. The 2nd monitor located in the kitchen is connected to the DVR using a 1 Channel passive balum video transceiver Sku # AP-VBS-22C. We need both monitors display the same exact screen and we can't seem to be able to do that. So we want to use a dual VGA splitter but I'm not sure how to connect the Balum to the VGA. Can you provide anyone provide some information on how we can set that up? Thanks. Share this post Link to post Share on other sites
Securame 0 Posted February 27, 2015 So we want to use a dual VGA splitter but I'm not sure how to connect the Balum to the VGA. You can't. You need either a "VGA to video" adapter, and then use the balun; or change the baluns for a "VGA over UTP" extender. This last one would provide you with a way better image quality, but you need to make sure that the monitor in the kitchen also has VGA input. The image quality with this cable might be bad. You might need to end up buying a "VGA splitter" that connects to power. Share this post Link to post Share on other sites
Lock-Up 0 Posted February 27, 2015 So we want to use a dual VGA splitter but I'm not sure how to connect the Balum to the VGA. You can't. You need either a "VGA to video" adapter, and then use the balun; or change the baluns for a "VGA over UTP" extender. This last one would provide you with a way better image quality, but you need to make sure that the monitor in the kitchen also has VGA input. The image quality with this cable might be bad. You might need to end up buying a "VGA splitter" that connects to power. Thank you for the info. Share this post Link to post Share on other sites
