Help for design

[rssn 0]

Note: I already post this in General Analog CCTV Discussion but I don't know how to remove

Hi Guys,

 

I'm new at setting up a surveillance camera but I understand how it works. Anyway guys what will you suggest with my project? this is my first time to setup this type of place, it's industrial area. I have a plan putting bullet cameras and 1 PTZ, but my problem is running the cables because they require UPS since they're using two generators and switching every 12 hours. Do you think it will work if I use Siamese cable from camera to dvr and power box?

 

Thanks in advance and looking forward to know you guys

[jeromephone 6]

yes that should work (rg59/w18ga power) make sure you size the UPS to handle the DVR and the camera load with infra red active. Type of UPS is a factor, as you don't want the voltage to drop and then have the UPS kick in I think you want a line interactive UPS that supplies constant voltage. I would size things to give yourself at least 15 MIn of runtime but that is something you will have to come up with. If possible I would go with a 24vAC isolated power supply. Such as made byAltronix

[rssn 0]

yes that should work (rg59/w18ga power) make sure you size the UPS to handle the DVR and the camera load with infra red active. Type of UPS is a factor, as you don't want the voltage to drop and then have the UPS kick in I think you want a line interactive UPS that supplies constant voltage. I would size things to give yourself at least 15 MIn of runtime but that is something you will have to come up with. If possible I would go with a 24vAC isolated power supply. Such as made byAltronix

 

Thank you so much sir! I would search what you've mention. I'm also having a doubt with my bullet cameras, they want to cover at least 90% of the border wall. I've tried searching online to calculate the field of view but I ended up to confusion. can you suggest me some website or computation? Thanks in advance.