DigitalC 0 Posted March 7, 2015 I have a Lorex LNR300 (8 channel) system installed with the monitor in my home office. I would like to be able to display the monitor in both my office and in the kitchen (about 150ft apart). Any suggestions as to how I can split the signal so that I can monitor in both locations? or would it be cleaner/simpler to just run a laptop/tablet and use an app to display? Share this post Link to post Share on other sites
Neutech 0 Posted March 8, 2015 Are you using VGA at moment ? Run cat6 from NVR to Kitchen and use HDMI Baluns and this will give you same screen in kitchen as Home office, also if you have IR remote most HDMI Baluns allow IR so you could use remote in kitchen to say change channels etc http://www.ebay.com/itm/Authorized-HDMI-Matrix-1080P-Extender-Cat5-Cat6-Up-120m-IR-Remote-SW-/281560729866?pt=LH_DefaultDomain_0&hash=item418e53c90a Share this post Link to post Share on other sites
