eaglecctv14 0 Posted March 10, 2015 Hello! I have an CCTV system that i'm trying to configure to access remotely from internet. The CCTV system and my PC are connected to a Switch and this switch is connected to my ISP router (Thomson TG784n). The first step that i need help is to access CCTV from my network. When i ping the CCTV system i got answer, but when i try to access from my browser (google chrome), i got "page not found". When i try to check if the port 80 is open (defined on CCTV) with http://ping.eu/port-chk/ i got, port is closed. I don't know why can i ping CCTV but i can't acess it from my browser? Can you help? Thanks in advance. Share this post Link to post Share on other sites
joanlee199063 0 Posted March 12, 2015 hi, 1. once the connection is ok, there`s no problem of ping. 2. if you want to access the cctv system remotely, port forwarding should be done on your router. 3. first check whether it is ok to access the cctv system in LAN; then set port forwarding on your router; test if it is ok to remote access the cctv system. hope it would be helpful Share this post Link to post Share on other sites
eaglecctv14 0 Posted March 13, 2015 Problem Solved! The port forwarding and all configurations were already done. I've installed the Video Viewer from Eagleeyes on my PC and rebooted the DVR, after that e could access remotly to my DVR. I suppose that after changing the settings in the DVR, reboot was needed to refresh the new configuration. Thanks! Share this post Link to post Share on other sites