trythis 0 Posted March 12, 2015 Having trouble setting this up with my system: Using Dlinkddns.com and the ip and port are visible using online tools. Router points to correct local IP device Port is 37777, protocol set to both UDP and TCP. This is the same for private and public port logins tried are set to reusable register mode is set to ip/domain I get the error "Login Timeout" with a good login or a bad one. I am using version 3.30.0000 Share this post Link to post Share on other sites
brebenac 0 Posted March 14, 2015 Check gateway section of device, and for God's sake, change the protocol to TCP only for port 37777. Share this post Link to post Share on other sites
trythis 0 Posted March 16, 2015 Thanks for the reply, I found the gateway, its set at the router IP address, but I can access the DVR over my LAN via Wifi on IDMSS I cant acces it on internet explorer though, page cant be loaded. Share this post Link to post Share on other sites
trythis 0 Posted March 29, 2015 Bump, any help? still not working Share this post Link to post Share on other sites
komoro68 0 Posted June 29, 2015 I also have a same problem (login timeout with idmss),i am using version 3.10.002..Anyone can help please...thank you very much Share this post Link to post Share on other sites
sawakura 0 Posted July 28, 2015 Having trouble setting this up with my system: Using Dlinkddns.com and the ip and port are visible using online tools. Router points to correct local IP device Port is 37777, protocol set to both UDP and TCP. This is the same for private and public port logins tried are set to reusable register mode is set to ip/domain I get the error "Login Timeout" with a good login or a bad one. I am using version 3.30.0000 Using the outside network to ping the ddns address to ensure it's working fine. If the result is connection time out (it show the IP but can't tranfer data) then some ISP blocked NAT, you have to contract the ISP to tell them enable NAT service Share this post Link to post Share on other sites