doublevision 0 Posted April 2, 2015 I have 16 CNB-D2005N cameras that were removed from an existing installation several years ago. I never saw the original installation. I have all the pieces to put the system back together (DVR, Power, cameras) but the wiring was left behind. They all have a small green connector with two square pins. I've attached a picture of the connector. Share this post Link to post Share on other sites
jazzar 0 Posted April 2, 2015 you will get them from RS components. you will need to measure the pitch- the distance from centre to centre of the pins. similar to this:- http://uk.rs-online.com/web/p/non-fused-terminal-blocks/0403875/ Share this post Link to post Share on other sites
jazzar 0 Posted April 2, 2015 or try this for a selection:- http://uk.rs-online.com/web/c/?searchTerm=2+way+screw+down+terminal+block+cable+mount&sra=oss&r=t Share this post Link to post Share on other sites
doublevision 0 Posted April 7, 2015 Thanks for the pointer! I have some on order. Share this post Link to post Share on other sites
