mrlew 0 Posted April 9, 2015 Is there such a thing as a standalone UTC Controller for TVI DVRs for controlling the OSD on TVI cameras? Is the UTC "protocol' (for want of a better word) standard or does it change with manufacturer of the TVI DVRs I have a mix of Hikvision & TVT TVI DVRs and am trying their own cameras on each other's system they work well but I can't bring up the OSD via the usual "Iris+ in the PTZ Controls". Just investigating standardising a camera for spares. thanks Share this post Link to post Share on other sites
Securame 0 Posted April 9, 2015 Make sure your PTZ settings on the DVR are ok. Share this post Link to post Share on other sites
mrlew 0 Posted April 9, 2015 Apart from being enabled, what settings are there? I somewhere that Hikvision uses Pelco C adaptive what ever that is but I don't see that on the DVR Share this post Link to post Share on other sites
Securame 0 Posted April 9, 2015 Hikvision calls it "Hikvision-C", check out the first screenshot. http://www.securamente.com/hdtvi-como-usar-el-osd-en-las-camaras-que-lo-soporten/ With Hikvision DVRs you can access the OSD menus with either "menu" or "iris+". I have actually only used HDTVI with Hikvision units, so I can not tell you about TVT. Share this post Link to post Share on other sites
lacctvsupply 0 Posted March 24, 2016 Yes. The item is Hikvision Model #: DS-1045 Share this post Link to post Share on other sites
