moejo3y 0 Posted April 12, 2015 Hey, so I moved into this house in 2013, and noticed 4 PTZ cameras situated around the house. I've been tempted to get them to start, so I went out and bought a DVR, HDD and Wireless Bridge to get it all started. One problem remains, the old tenants have taken the power supply box for the cameras and cut all the wires. Now this isnt a problem for me, sure, I can always look online for a good PSU as well as go down to JayCar and get some electrical wires and wire cutters. I'm just worried about the PSU i need to get. I live in Australia, and not sure how much voltage I need and what not, whether it be 12v to dc or 12v to ac or anything. So if anyone can help me, it would be greatly appreciated. The cameras are worn out and what not but I've had a look in them and they seem to be fairly modern I'm assuming around 2007ish. If anyone could redirect me to where a good place to start looking would and what the specs. of the PSU should be. Share this post Link to post Share on other sites
CCTV_Suppliers 0 Posted April 13, 2015 What make and model are your PTZ cameras? Share this post Link to post Share on other sites
