krahim 0 Posted March 8, 2006 HI guys I’m glade to joint you I have CCTV system to monitor the offshore and controlled from onshore by MOLYNX TTX601 single camera control keyboard link by radio the control keyboard can opera the zoom/focus/wash/wiper /pan/tilt unit My problem was all this function was stopped I replace modem both onshore /offshore no change Please your advice Share this post Link to post Share on other sites
Cooperman 0 Posted March 8, 2006 Hi krahim and welcome, Maybe the first thing to do is establish whether the telemetry is actually functioning correctly, before you start worrying about the wireless transmission system. If you can take the transmitter to the camera position, and hard wire with a short length of twisted pair cable, you should be able to confirm that all the various functions are working correctly. If it works o.k., you know the problem is likely to be with the transmission side. If it doesn't work, then obviously check power supplies and connections, particularly to the terminal blocks on the receiver card. Do a few simple tests and then perhaps post back with your findings. Share this post Link to post Share on other sites
