amer1024 0 Posted May 1, 2015 dear all i have project contain 52 ip camera and my problem with hikvision nvr 9664 is while adding the cams to nvr the first 45 cam added normal but at cam number 46 the nvr reject it and appear message " no enough network bandwidth" after that i decreased the resolution from full frame"35fps" into 20fps but the problem not solved note: the nvr bandwidth is 160 MB which if we calculate the currant bandwidth will be 45 cam*20fps = 90 MB so we still have enough bandwidth after decrease the resolution into 20fps but the problem not solved yet any help....any advice.. the delivery date of the project very close best regards Share this post Link to post Share on other sites
Boogieman 1 Posted May 1, 2015 dear all i have project contain 52 ip camera and my problem with hikvision nvr 9664 is while adding the cams to nvr the first 45 cam added normal but at cam number 46 the nvr reject it and appear message " no enough network bandwidth" after that i decreased the resolution from full frame"35fps" into 20fps but the problem not solved note: the nvr bandwidth is 160 MB which if we calculate the currant bandwidth will be 45 cam*20fps = 90 MB so we still have enough bandwidth after decrease the resolution into 20fps but the problem not solved yet any help....any advice.. the delivery date of the project very close best regards You need to decrease the camera bitrate..fps has no effect on bandwidth... Share this post Link to post Share on other sites
amer1024 0 Posted May 1, 2015 Thank you boogiman for your replay but do you mean make the resolution in full frame and decrease the bit rate ? What's the value of bit rate you recommended? Share this post Link to post Share on other sites
Boogieman 1 Posted May 2, 2015 Thank you boogiman for your replay but do you mean make the resolution in full frame and decrease the bit rate ? What's the value of bit rate you recommended? You need to do the calculation...you can set the bitrate for each camera.. Share this post Link to post Share on other sites
MaxIcon 0 Posted May 3, 2015 Here's Hik's recommended bit rate settings for various resolutions and FPS: http://www.hikvision.com/en/us/support_more.asp?id=278 Share this post Link to post Share on other sites
