dd12 0 Posted May 4, 2015 Hi Guys, I have an issue with one of my cameras and have tried everything to try and work out what it could be (different psu, changed/checked baluns and switched dvr port). Everything was going okay until this morning when the cameras (105 led night owl) started having picture issues eg: horizontal white bands and now total black with a constant fuzz. If I unplug/replug in the camera its ok for about 5-8 seconds then I get picture issues again. I think the camera might have had it? Any advice is appreciated. I have attached an example image. Share this post Link to post Share on other sites
dd12 0 Posted May 4, 2015 Believe it or not this was caused by a faulty o-ring seal and condensation had built up within the lense. All fixed now. Share this post Link to post Share on other sites
