Geovision datacapture V3e with Ruby 2

[Siiak 0]

Hi all,

 

Has anyone hooked up the geo data capture box with a VeriFone Ruby2 system to overlay the transaction data, the customer pole display is hooked to com3 which is a RJ45, I think the system is providing data and power to the pole display via the cable, I will appreciate if any one has a pin out configuration for a link where I can buy the premade cable .

 

thanks

[bullhound 0]

Did you find a solution to this? We just recently installed the Ruby 2 and cannot seem to get the Geovision V3E to work correctly. We tried using the same configuration from a Sapphire/Ruby but it won't work.

[Siiak 0]

Did you find a solution to this? We just recently installed the Ruby 2 and cannot seem to get the Geovision V3E to work correctly. We tried using the same configuration from a Sapphire/Ruby but it won't work.

 

 

No Still searching for a solution Geo was not a big help, please keep me in loop if u find a solution.

 

Thanks

[bullhound 0]

Did you find a solution to this? We just recently installed the Ruby 2 and cannot seem to get the Geovision V3E to work correctly. We tried using the same configuration from a Sapphire/Ruby but it won't work.

 

 

No Still searching for a solution Geo was not a big help, please keep me in loop if u find a solution.

 

Thanks

 

We finally got it working. We had to change the baud rate to 1200 and data bit to 8 on the V3E. The port has to be configured on the Ruby 2 correctly as well....it has to be set to the DVR something...sorry...we use a petroleum service to set that part up so I can't help much there.

 

If I get more info, I'll post for you.

[Siiak 0]

Did you find a solution to this? We just recently installed the Ruby 2 and cannot seem to get the Geovision V3E to work correctly. We tried using the same configuration from a Sapphire/Ruby but it won't work.

 

 

No Still searching for a solution Geo was not a big help, please keep me in loop if u find a solution.

 

Thanks

 

We finally got it working. We had to change the baud rate to 1200 and data bit to 8 on the V3E. The port has to be configured on the Ruby 2 correctly as well....it has to be set to the DVR something...sorry...we use a petroleum service to set that part up so I can't help much there.

 

If I get more info, I'll post for you.

 

 

I will really appreciate your help, which com port dose the cable goto also the cable did you use a standard RJ45 to db9 straight serial cable or did you custom made it.

 

Thanks

[bullhound 0]

I will really appreciate your help, which com port dose the cable goto also the cable did you use a standard RJ45 to db9 straight serial cable or did you custom made it.

 

Thanks

 

We programmed COM5...again someone will have to program the Ruby 2 COM port for the virtual printer. We use a standard ethernet cable from the Ruby 2 to a RJ/45-DB25 adapter. We pin the adapters ourselves. Pin2-Orange...Pin3-Blue...Pin6-Black...Pin7-Yellow...the rest I don't use. That DB25 plugs into the Parallel Port to Printer/RS-232 (DB25) Female on the V3E.

 

Hope that helps!

[wgovideo 0]

Ruby 2 works on Com port 5, set to False in commander. on the inserter side 9600 8/n/1. One of our Petro service guy turned me on to a great help forum at www.pei.org (petro help site for techs) Great site if you are running newer registers.

[nathanC 0]

Hi all, could we connect the RJ45 to DB9 instead of DB25? Did anyone tried that before? Verifone Ruby2. Com5 to DVR.

 

Any info would be appreciated!

 

I am using this pin layout:

DB9> RJ45

1>2

2>6

3>5

4>1

5>4

6>3

7>7

8>8

9 null

I can get the data every time I type product on the cashier, but the data I got is something like Greek.... 9600/8/1/n.

I don't know if is the pin layout causing the issue. Any thoughts would be appreciated!

 

Thanks again.