billkater 0 Posted May 17, 2015 (edited) I have searched thru some of the treads and downloaded the different ix protocols and placed them on my dropbox. I did this because it seems it is so hard for everyone to find the protocol they need. I am also going to add the firmware versions to the list. If you have a link to download either the protocol or firmware, post it here and I will add it to my dropbox. I will also link to the original download pages if I can still find them. Just trying to make it easier for all to get their mini nvrs working like they should. Disclaimer: I have not tested any of these or guarantee they will work. Use at your own risk. Here is the link to my dropbox https://www.dropbox.com/sh/ggnp0vodplxux7q/AADuEJzbEWcBUJ7U6ZkNeIY2a?dl=0 Here is a link to firmware updates from URCCTV http://www.urcctvstore.com/Download.html Added a file with telnet instructions to my dropbox Edited May 18, 2015 by Guest Share this post Link to post Share on other sites
billkater 0 Posted May 17, 2015 Pulled this from the Mini NVR question post on page 52 http://www.cctvforum.com/viewtopic.php?f=56&t=39628&start=765 posted by redders http://www.cctvforum.com/memberlist.php?mode=viewprofile&u=44179 @Kurben Motion detection only works if the camera supports it directly as it's not a feature of the NVR itself but the NVR can take advantage of the motion detection capabilities of a suitable camera. If the camera is ONVIf Compliant and has motion detection built in I believe it should work. If you look back through the posts you can see many posts from Mike Mahon saying that they created a lot of private protocols to provide interoperability with different Camera vendors (even ones who may appear to support ONVIF but impliment there own version). Apparently HIKVision Cameras originally did not work using ONVIF but later firmware did (and does work for me) so presumably HIKVision now follow the ONVIF protocol more closely. But other vendors may not. I can't remember where I got this list from when i was googling a few weeks back, It's of special protocols vs camera vendors (your cameras may be a rebrand of one of these) I8- AEVISION/ Wision/ Devele/ HYvision I8S- Tong Fang( TFCC) I9- Topsee I11- CNB I12- XM( Jufeng) I13- Hichip I15- Launch I16- RONG TIAN SHI(RTS) I19- Grandstream I20- HANY I21M, I21H- Apexis I22- Xin Hai I23- KT&C I24- JXJ I25- RDS I26- Safer I27- Polytims I28- DLINK I29- Ecsino I33- Dahua Sadly not all protocols are loaded in the standard firmware and i'm not sure where you can download them from if you don't have them already. Share this post Link to post Share on other sites
