Scheduled snapshot - HIKVISION DS-7200-HWI-SH

[jckh9999 0]

Hi All,

 

I would like to take scheduled snapshot of my cameras (i.e. one picture every 30 min).

 

We have DS-7200-HWI-SH series at multiple location and would like them to upload or record a snapshot to a network location at a given interval.

 

Would anyone know if this can be done either via the DVR or CMS/IVMS and how?

 

I searched the forum. There was one similar topic but the answers weren't so clear.

 

Thanks in advance,

JC

[jckh9999 0]

Hi All,

 

I am coming back again trying to get help.

 

I searched most of the thread but none of them really had answers re. CCTV DVRs.

 

one of them was referring to the following link:

http://[ip]/Streaming/channels/101/picture

 

I tried it with no luck. It seems to be for the older firmware.

 

Would anyone have tested how to grab still images using http on the dvrs?

 

i'm using some 7208HWI-SH and 7216HWI-SH and some newer 7216HGHI-SH

 

Thanks,

JC

[Securame 0]

Check this out:

 

http://www.hikvisioneurope.com/portal/index.php?dir=Integration%20and%20Development%20Materials/00%20%20%20CGI/

 

Take a look at "HIKVISION CGI IPMD V1.5.9.pdf" (IPMD = IP Media Device Management Protocol). Page 76 is what you are referring to. I used to have this working, but I just tried with our 7208HWI-SH and doesn't seem to work.

 

RTSP should be working. You might want to make a program that connects with RTSP to the devices every 30 minutes, and gets a screenshot fromi the RTSP stream.