beengone 0 Posted May 18, 2015 I'm looking to replace my church's current camera, a Speco CVC-870ex (it's and outdoor, weatherproof camera, but doesn't need to be). The current camera and RF modulator have gone bad. It's a simple setup with two output TVs: one in a nursery, one in the entry area. I'd prefer not to replace any existing wiring if I can help it. The setup is this: camera on the wall with composite BNC connected to coax. That coax runs to an RF modulator where audio from the main sound board is added, then the signal is output to coax that's later split to the two locations, which are old CRTs. We don't have any other connection types (Ethernet, etc) at the TV locations. My assumption is that we should just replace the camera and RF modulator so we don't have to run more cable. Could anyone recommend a camera that would fit my needs, as well as an RF modulator? I wonder if the modulator needs to boost the signal. The total cable length is somewhere around 120', including the trunk and branches. Someday we'll replace the TVs with small flat TVs, so if there's anything to plan ahead for, or if the time to run cable will save me a ton of headache later, I'd consider that. Would prefer quick-and-easy for now if possible. Share this post Link to post Share on other sites
