ic1nyc 0 Posted May 25, 2015 Happy Memorial Day all. I came across one of these units that continuously makes a clicking noise then shuts down after trying to boot (grid w/o video displays for a second or so, then unit shuts down). Clicks coming from the i/o panel at rear of device, not psu or drives. Any ideas as to what caused failure? Can the i/o panel (which appears to be slotted into mainboard) be replaced at reasonable costs? TIA Share this post Link to post Share on other sites
tomcctv 190 Posted May 25, 2015 Hi. On the 32 you should have a few green led lights on main board Remove the lid and restart unit and see if they all come on Also unplug any H/Drives connected. Share this post Link to post Share on other sites
ic1nyc 0 Posted May 25, 2015 Tx for the response. Did open unit and disco'd all drives and tested psu. There are some LEDs on mainboard that light up then go out on boot. Also found what I took to be a reset switch. I have no docs or schematics for the dvr, and am at a lost. Share this post Link to post Share on other sites
tomcctv 190 Posted May 25, 2015 Hi. Plug first drive back in ...... Looking from front of unit it is furthest right Share this post Link to post Share on other sites
ic1nyc 0 Posted May 25, 2015 Not on site right now, but what am I looking for? From my time with the DVR, there was no change booting with or w/o drive connected. Share this post Link to post Share on other sites
