metuckness 0 Posted May 25, 2015 I am looking for some ideas on how to diffuse an IR floodlight. I installed it out front to give me more illumination than the factory lights from the IR cameras I use, but the IR Flood is too concentrated. So I was hoping I could get a couple of ideas. My first thought was to put some window tint over it to reduce the intensity of the center of the flood, but there might be other ways, like a splitter that could redirect each side of the light off to the side or something. Plus I am not sure how well window tint would work on IR. Any suggestions? This is what the flood looks like now. Share this post Link to post Share on other sites
steve6690 0 Posted May 25, 2015 http://www.ebay.co.uk/itm/PRISMATIC-ACRYLIC-3MM-THICK-LIGHTING-DIFFUSER-PMMA-/170593237322?pt=LH_DefaultDomain_3&hash=item27b826394a I'd be tempted to try a cheap fix like the one above. Share this post Link to post Share on other sites
metuckness 0 Posted May 25, 2015 http://www.ebay.co.uk/itm/PRISMATIC-ACRYLIC-3MM-THICK-LIGHTING-DIFFUSER-PMMA-/170593237322?pt=LH_DefaultDomain_3&hash=item27b826394a I'd be tempted to try a cheap fix like the one above. That's a good idea, lemme see if I can find a place that ships to the US, it's worth a try. Share this post Link to post Share on other sites
myiicu 0 Posted May 26, 2015 http://www.homedepot.com/p/OPTIX-23-75-in-x-47-75-in-Prismatic-Clear-Acrylic-Light-Panel-1A20083A/100550880?N=5yc1vZc58p Share this post Link to post Share on other sites
metuckness 0 Posted May 26, 2015 http://www.homedepot.com/p/OPTIX-23-75-in-x-47-75-in-Prismatic-Clear-Acrylic-Light-Panel-1A20083A/100550880?N=5yc1vZc58p I actually found a 4MM on Ebay, straight from China, but free post and cheaper. I am hoping it's easier to cut and size due to the larger size. Share this post Link to post Share on other sites
Charly1954 0 Posted May 28, 2015 I'm a newbee to all this. I also added a illuminator to brighten a dark area. It did but the illuminator had a flashlight beam not wide. I did research and found I needed to add something to diffuse or spread out the light. I doubt this would work, haven't bought any to try it yet. But if I took a piece of the clear wax paper, wadded it up to make allot of different angled surfaces, then taped it on the illuminator. Do you think this would work? Being wadded up it would diffuse the light but would enough light shine thru the paper? Here's a diffuser for a flash on a camera, may work http://www.ebay.com/itm/White-Flash-Diffuser-Cap-Box-for-CANON-Speedlite-Flashgun-580EX-580EX-II-/321387365519?pt=LH_DefaultDomain_0&hash=item4ad42e048f Or maybe this, its a camera diffuser lens http://www.ebay.com/itm/Kenco-T-975-Diffuser-Lens-for-900-Series-Movie-Video-hot-Lights-USED-V615-/350787203201?pt=LH_DefaultDomain_0&hash=item51ac8bf081 Share this post Link to post Share on other sites
metuckness 0 Posted June 5, 2015 I got the diffuser material and tried it. Here is the video of me adding the diffuser to the front of the IR light. I stuck it right to the IR Flood, I think it would have better results if I could extend it out, but I will have to find a means of doing that. For now I think it made a bit of a difference as it is and will leave it while I see if I can figure out how to get it an inch or so away from the light. Links to the items are in the video description. Share this post Link to post Share on other sites