narinesa 0 Posted June 4, 2015 I am using ip network camera with NVR Camera A is remote channel 1 and assigned to viewing on NVR channel 1 Camera B is remote channel 1 and is assigned to viewing on NVR channel 3 Viewing works fine because A is on channel 1 and B is on channel 3 When A and B were installed from different manufacturers, they are both assigned number 1 for each manufacturer automatically. Problem is that the NVR cannot control 2 cameras on the same physical remote channel number 1 (but no problem with viewing because the viewing is reassigned) I need help with changing one of the remote physical channel Looks like it has to be done on the actual camera but I have no idea or software how to change it Share this post Link to post Share on other sites
topchips 0 Posted June 4, 2015 I am using ip network camera with NVR Camera A is remote channel 1 and assigned to viewing on NVR channel 1 Camera B is remote channel 1 and is assigned to viewing on NVR channel 3 Viewing works fine because A is on channel 1 and B is on channel 3 When A and B were installed from different manufacturers, they are both assigned number 1 for each manufacturer automatically. Problem is that the NVR cannot control 2 cameras on the same physical remote channel number 1 (but no problem with viewing because the viewing is reassigned) I need help with changing one of the remote physical channel Looks like it has to be done on the actual camera but I have no idea or software how to change it Hi You can try and log into the camera using the ip address of the camera via a browser and check the settings there, Regards Share this post Link to post Share on other sites
narinesa 0 Posted June 4, 2015 I tried everything I can think of because posting. Could not find any option via the web browser I have even contacted Dahua for the NVR but as you know, Dahua does not provide technical Share this post Link to post Share on other sites
topchips 0 Posted June 5, 2015 I tried everything I can think of because posting.Could not find any option via the web browser I have even contacted Dahua for the NVR but as you know, Dahua does not provide technical HI Is it a Dahua IP PTZ camera, if so you can change the camera number with the dip switches send me the model number then can get you the dip switch settings Share this post Link to post Share on other sites
narinesa 0 Posted June 5, 2015 All equipment are digital network - not analog Everything has two cords each - 1. power, 2. cat5 - no other cables. Everything is connected only to the network. No camera is connected to the NVR. Digital IP network camera does not have any dip switch to set or manage -everything is done via software on the network The Dahua camera is SD65230HNI Share this post Link to post Share on other sites
