fluorescent lights causing interference

[topchips 0]

Hi All

 

I have a customer with AHD cams, the fluorescent lights is causing interference (horizontal lines ) , Iv checked on the OSD and there is no setting to change the cam between 50HZ or 60HZ was wondering if any one had any other solution, Iv read up that changing the exposure settings might help (see you tube video:https://www.youtube.com/watch?v=4Go3ksjkoKU ) however haven't got the equipment to test.

 

thanks in advance

[SyconsciousAu 0]

Hi All

 

I have a customer with AHD cams, the fluorescent lights is causing interference (horizontal lines ) , Iv checked on the OSD and there is no setting to change the cam between 50HZ or 60HZ was wondering if any one had any other solution, Iv read up that changing the exposure settings might help (see you tube video:https://www.youtube.com/watch?v=4Go3ksjkoKU ) however haven't got the equipment to test.

 

thanks in advance

 

Is it possible to re-route the cable so it avoids the fluorescent light fitting?

 

If not try some of the solutions here

 

http://www.lrc.rpi.edu/programs/NLPIP/lightinganswers/pdf/view/LAEMI.pdf