PIR sensor with IP capability?

[alkizmo 0]

All my search on PIR for IP cameras result in either:

 

- IP Cameras with a PIR sensor inside.

- IP Cameras with I/O port for an external PIR sensor

 

But I have never found a PIR sensor that is stand alone and can send an alert over LAN.

 

Is there such a thing? It would be easy for me to program the PVR software to start recording on specific cameras when an alert is received.

 

Otherwise, can someone recommend a 100$-ish outdoor IP camera that has a PIR sensor in it? 720P is okay for the location.

HIKVisions's only PIR cameras seem to be those cube(indoor) cameras.

[bramvdh 0]

http://xtralis.com/product_view.cfm?product_id=114

 

Not really sure this is what you seek. PRO E-IPM - IP Module for connecting detectors directly to a VPN-Security Network

[alkizmo 0]

http://xtralis.com/product_view.cfm?product_id=114

 

Not really sure this is what you seek. PRO E-IPM - IP Module for connecting detectors directly to a VPN-Security Network

 

 

A bit too "pro" for my budget. I'm guessing those don't cost 20$

[stonewatch 0]

Combine PIR-sensor and Arduino-Ethernet.

[MaxIcon 0]

Amazon has a variety of PIR sensors listed, from components to system level.

[gonzogg 0]

Combine PIR-sensor and Arduino-Ethernet.

 

I always want to try this solution, but I have not experience with Arduino. Have anybody try this solution and care to share?

[digger11 0]

I've built a Z-wave PIR as an experiment...

 

 

Components:

http://www.amazon.com/gp/product/B000W41J6S

http://www.amazon.com/gp/product/B0030G8SC8

http://www.amazon.com/gp/product/B008Q5CTBE

 

Motion detection on the PIR sends power to the relay, which closes the z-wave door sensor, sending a "tripped" state alert to my VeraLite. The VeraLite runs a scene that sends an external trigger to Blue Iris, to trigger motion recording on a group of cameras covering the front of my house.

 

I chose the RAB PIR because unlike most of these lighting PIRs, the RAB can be set to detect motion during daylight hours.

[thewireguys 3]

This is what to you are looking for but it is probably out of your price range.

 

http://www.optexamerica.com/security-products/pie-1

[PlayedIn 0]

I've built a Z-wave PIR as an experiment...

 

Components:

http://www.amazon.com/gp/product/B000W41J6S

http://www.amazon.com/gp/product/B0030G8SC8

http://www.amazon.com/gp/product/B008Q5CTBE

 

Motion detection on the PIR sends power to the relay, which closes the z-wave door sensor, sending a "tripped" state alert to my VeraLite. The VeraLite runs a scene that sends an external trigger to Blue Iris, to trigger motion recording on a group of cameras covering the front of my house.

 

 

I chose the RAB PIR because unlike most of these lighting PIRs, the RAB can be set to detect motion during daylight hours.

 

Sorry to reply to a 3 year old post, but.... Can you shed a little more light on VeraLite's ability to send an external trigger?

 

I currently have a wifi pir that triggers IFTTT to send an http admin command to BI to start recording on a camera. Am I correct in assuming you're using Veralite in the same way?

 

The reason I ask is that IFTTT has such a terrible delay, it is practically useless for triggering a camera to record in BI. I've been trying to figure out an alternative way to issue an http command to BI. I would definitely buy a Veralite if this method has been reliable for you?

[blake 0]

I've just started experimenting with Optex sensors using nvr inputs.