schnax 0 Posted June 23, 2015 Hi, got a Dahua NVR7864-RH and 33x Dahua SD6A220-HNI. Trying to setup the system so that motion only is recorded but the systems is not recording it. Did the following settings in the NVR Setup-Event-Video Detect-enable for all channels, Setup period for 24/7 - all days, anti-dither 0, Region - not sure do I have to select a box to included it in motion or exclude it, check mark for record channel, delay 10 Setup-Storage-Schedule, select motion only for all channels (yellow bars). So why is the systems not recording for motion events? The system does record 24/7 when set on the schedule to regular but I don't want that. Share this post Link to post Share on other sites
MeisterGN006 0 Posted July 14, 2015 In my experience setting the anti dither to anything less than 5 second tends to create problems with dahua NVRs when trying to record on motion For the motion detect region masking you want to use the color overlay to mark which sections on the video feed you want to trigger motion. Share this post Link to post Share on other sites
