Problem with pc in a ip cam network usin a Seenergy nvr

[sjcronchi 0]

Hi. First, sorry! My english is very bad!!!!! I have a problem. I installed a seenergy svr-516 nvr, with 14 ip cams. I use a pc to view all cams through the nvr. But, my problem is: PC stop and tilt. I use a Gigabit lan between nvr, pc, and 2 switches where the ip cams are connected. When pc stop, the nvr work successfully, and ip cams too. But i can´t see cams. If I reset the pc, I can see the nvr again for many hours, until the pc stops again.

I need help!!!!!

thanks,

Sergio