rfeyer 0 Posted July 12, 2015 Hi all, read through your already existing help threads. I've been at this for ever, can't seem to get it working - with ports forwarded, using myname.no-ip:biz:6080 gives me a PAGE NOT FOUND error: I have a Hik 7616 version V3.0.10 with the following set up: NAT: xt IP Port HTTP 6040 0.0.0.0 6080 why are there diferent port #'s? RTSP 554 0.0.0.0 6010 Server 8000 0.0.0.0 6060 NVR IPv4 192.168.0.44 sub 255.255.255.0 gate 192.168.0.1 Pref DNS 192.168.0.1 Int NIC 192.168.254.1 My home network (LAN) is 192.168.0.1 (gateway) Cameras are set up in IP range of 192.168.0.xxx - into a POE which then attaches to my home LAN NVR also attaches to home LAN I do have no-ip.biz as well My questions: should the domain name have the port added to it? like: somename.no-ip.biz:port? If so, which port should be used? I have not found any explanation which describes why there are int and ext HTTP ports. What is the difference? I would be very happy if this could finally work. Rainer Share this post Link to post Share on other sites
