spippolone 0 Posted July 26, 2015 Hi, Ii have a DVR model AT-B3520HD with firmware V1.01.2839, the problem is HDMI output resolution, in the menu resolution, there are: 1024X768 1280X1024 1440X900 1920X1080 but it's working until 1440X900 NO WORK in 1920X1080 someone can help me ? There an firmware update ? I hope in your help !! Thank you Share this post Link to post Share on other sites
tomcctv 190 Posted July 26, 2015 Hi ... It's a D1 dvr with HDMI output ....... It's not hi res .....sales pitch No point you looking for firmware Share this post Link to post Share on other sites
Securame 0 Posted July 26, 2015 Does your monitor/TV actually support 1920x1080? I do not think the DVR is the problem. Share this post Link to post Share on other sites
spippolone 0 Posted July 26, 2015 Hi, thank you for your answer, my problem is this: I have a DTT modulator with HDMI input, it work fine with 1920X1080 but ho work with 1440X900 input. I have saw in the DVR menu 1920X1080 output video, it is selectable, (and selected) but the signal out recognized to the TV and also the DTT Modulator it is 1440X900, In attach the example... and with 1440X900 on the TV appair Service not avalaible. In fact, if I tune the tv vith the modulator without signal input, the tv recongize the channel (my LCN 777) with the station name (DVR HD), but if tune the TV with same situation but with HDMI connected to 1440X900, the TV don't recognize the channel and don't save nothing in the list. I hope in your help !! Share this post Link to post Share on other sites
Securame 0 Posted July 26, 2015 Have you tried connecting the DVR directly to a TBV that supports 1920x1080? I would say it will work. Are you sure that modulator supports 1920x1080? Share this post Link to post Share on other sites
spippolone 0 Posted July 26, 2015 Have you tried connecting the DVR directly to a TBV that supports 1920x1080? I would say it will work. YES and in the picture the TV is connected directly on HDMI2 Port you can see in bottom.. on the grey line and the DVB was to set 1920X1080 you can see it in other picture.. Are you sure that modulator supports 1920x1080? YES sure if you connect the HDMI out from PC in a 1920X1080 you can see the picture perfectly on the TV connected to antenna cable. The problem is just that the modulator work to 1920X1080 only !! Share this post Link to post Share on other sites
Securame 0 Posted July 27, 2015 Understood, so the problem is that even the DVR says it has 1920x1080, it is actually 1440x900? That is one crappy DVR then. Share this post Link to post Share on other sites
Chinnyssh 0 Posted October 9, 2015 Hi im new here..... i hav a problem on my local brand Dvr here at PI. Share this post Link to post Share on other sites
Chinnyssh 0 Posted October 9, 2015 brand: SmartWatch 8CH H.264 Network Digital Video Recorder model: DO-108 please help i hav a problem on boot.... when i'll start the unit on smartwatch logo stuck! its firmware problem or what??? Share this post Link to post Share on other sites
Chinnyssh 0 Posted November 13, 2015 up up for this thread Share this post Link to post Share on other sites
