Dahua NVR4116H and D-Link DCS2121

[pastore.a 0]

Hello,

recently I bought 3 Dahua cams IPC-HFW4200S and a NVR4116H.

With these products of course the compatibility is the maximum and I have not any problem.

I have an old IP camera too, it’s a Dlink DCS2121. This camera is not an ONVIF cam.

 

This cam can supply different MPEG4 or MJPEG streams (with different resolutions and frame rate):

JPEG http://IPADDRESS/image/jpeg.cgi

MJPEG http://IPADDRESS/video/mjpg.cgi

MPEG4 or MJPEG rtsp://IPADDRESS:554/play1.sdp

MPEG4 or MJPEG rtsp://IPADDRESS:554/play2.sdp

MJPEG rtsp://IPADDRESS:554/play3.sdp

MPEG4 rtsp://IPADDRESS:554/3gpp

 

I tested the “generic cam” preset setup for this cam, the camera is recognized by the nvr (green (V) symbol), but after few seconds the symbol turn red (X).

 

There is a hope to connect this D-Link cam to a Dahua NVR?

 

Thanks for your help

Andrew

[pastore.a 0]

Hi,

 

I think that this D-Link camera is not compatible with the NVR Dahua.

 

I think that the NVR Dahua accepts only H264 streams, and the DCS2121 can supply only MPEG4 and MJPEG streams...

 

Andrew

[pastore.a 0]

Someone can suggest me how to convert the stream to show it on the NVR Dahua?