Floureon 960H DVR motion recording

[DannyG81 0]

Hello all, new to the forums as I've just purchased myself a small CCTV camera setup for the first time.

 

Everything's connected and working fine, I can see the feeds via the DVR and phone app, both locally and via the Internet. My problem is it doesn't seem to be recording when detecting motion, the options seem to be a bit vague and not very self explanatory. Has anyone set one of these up to do record on motion before?!

 

Any help appreciated.

[Wonderlands 0]

You know that the motion detect 'mask' is an inclusive mask - i.e. movement inside the green box results in a detection and the movement outside it is ignored. Set the mask to the area you want to monitor - set the buzzer to 'on' and set the alarm duration for as long as it will take you to get back from the monitored area to the DVR. Then check the tick box for a snapshot when motion is detected, then test walk the area. You should hear the buzzer sounding if there has been an activation, if not turn up the sensitivity and try again.

 

Hope it helps.