Access DVRs connected to WAN on Lan.

[thekenyan 0]

Hi,

 

This is my first post on this forum . We have four DVRs with static IP addresses and our ISP both of whom are on ether1. We use a Mikrotik router.

 

The IP address for ether1 (WAN) are as follows;

 

DVRs : 10.7.7.11 , 10.7.7.12 , 10.7.7.25 and 10.7.7.26 with TCP port 377777 , HTTP port 80 and UDP port 37778

ISP : Static Port 10.40.1.2

 

 

The IP addresses for ether2 ( LAN) are as follows;

 

LAN IPs : 10.8.7.200 - 10.8.7.252

 

I wish to make the DVR IPs available from our LAN. Kindly help.

 

thekenyan

[SyconsciousAu 0]

Hi,

 

This is my first post on this forum . We have four DVRs with static IP addresses and our ISP both of whom are on ether1. We use a Mikrotik router.

 

The IP address for ether1 (WAN) are as follows;

 

DVRs : 10.7.7.11 , 10.7.7.12 , 10.7.7.25 and 10.7.7.26 with TCP port 377777 , HTTP port 80 and UDP port 37778

ISP : Static Port 10.40.1.2

 

 

The IP addresses for ether2 ( LAN) are as follows;

 

LAN IPs : 10.8.7.200 - 10.8.7.252

 

I wish to make the DVR IPs available from our LAN. Kindly help.

 

thekenyan

 

Change you Lan IP range to 10.7.7.200 to - 10.7.7.252, or change your DVR's to 10.8.7.xxx

 

Make sure everything is on the same subnet mask

[jamie398 0]

Can you put the 4 DVR's in the LAN and just NAT to them?