WillsMyth 0 Posted August 31, 2015 I'm currently setting up a camera system including a couple of pelco series 3 cameras (DD53TC16). The issue I'm having is that I bought these cameras used and a few of them have the setting to default back to a specific location turned on. I need to turn this off but from what I understand I need to go to preset 95 to display the camera option. The problem is that I don't have a stand alone ptz controller so I have no way to specify preset 95 since my dvr only has 50 presets. Does anyone know how to change the settings on one of these cameras with out a stand alone ptz controller? Share this post Link to post Share on other sites
survtech 0 Posted August 31, 2015 Try preset 28 using Pelco D protocol (or possibly AD 32-preset mode). Remember, you don't want to use the function to call the camera to that preset location but to set the preset (also called define preset). http://www.timelapsesupply.com/Docs/pelco%20specs_manuals/TLS%20Links/tlslink_c2444mdsp.iii.pdf See page 9 - "Accessing Main Menu" and page 11 - "Presets". Share this post Link to post Share on other sites
