Pelco PTZ Camera showing image but not responding

[brucelipkiss 0]

Hello Friends,

I have here with me is a Analog 36X PTZ Array Camera which is giving a problem and needs to be factory reset. The Problem is once u on it , it auto zooms in and zooms out for sometime ( 10 mins ) then later rotates and the usual pan tilt for checking. Then it stays in the position just showing ID12 on the screen , with no Braudrate or any other information about the camera. I try to control it with RS485 with id as 12 and did a lot of tries , but not able to bring it back to control . I was able to check the SW2 DIP Switch and other images i have posted here . Would be great if someone can help me find the solution to just reset it to factory . We got it back from the customer , the older setting seemed to be ID 001, Baudrate - 2400 PELCOD , but now its not responding to it .

 

 

 

[ssnapier 0]

I am fairly certain that there is a dip switch for baud rate too. I would suggest downloading the manual for the camera and verifying your settings.